VEVOR 3X5 Inch Heat Press Kit 110V Heat Press Plates 6061 Aluminum Plates Kit with Dual Digital PID Temperature Controller Box and 2 X Heating Rods

Description

Heat Press Plates 3X5 Inch Double Layer Dual PID Temperature Controller

This 3×5 inch Heat press plates kit owns double layer temperature controller. Light and strong 6061 aluminum is applied for heating plate for excellent heat transfer, thus reaching better working result. It is applicable with any hydraulic press up to 20T 2″ diameter ram or less. Pairable with A or H frame presses.

Comes with a full kit. 2 heating rods, 1 double PID controller, dual heaters, dual temperature sensors, 1 power cord, mounting screws and a wrench.

Controller Five Control Optional:

0. One alarm relay.

1. Relay contact PID output.

2. One alarm relay output; SSR all the way non-contact level PID output.

3. One alarm relay output; SSR-level all the way back to poor control output.

4. Backlash relay control output.

Features:

Strong and light 6061 aluminum for heat plates

2 heating rods, 9.5x120mm

Compatible with various hydraulic presses, A/H frame

Comes as a complete set with accessories. Also a suitcase is involved for easy storage and transport

Specification:

Voltage: 110V AC

Plate Size: 3×5 inch

Plate Thickness: 30mm (1.18″)

Top Plate Inner Diameter : 55mm (2.17″).

Plate Height : 50mm (1.97″)

Plate Material: 6061 aluminum

Gross Weight: 9.5 lb (4.3 kg)

Package Dimensions (L x W x H): 13.4″ x 12.6″ x 5.5″ (34 x 32 x 14 cm)

Package Content:

1 X 3X5 Inch Heat Press Plates (Top Plate & Bottom Plate)

2 X Heating Rods

1 X Double PID Double Layer Temperature Controller Box

1 X Wrench

1 X Power Cord

1 X Suitcase

• PLATE PARAMETER-3×5 inch Heat plate. Plate thickness: 30mm (1.18″). Top plate inner diameter: 55mm (2.17″). Height : 50mm (1.97″)
• WELL-CHOSEN MATERIAL-6061 aluminium heat plate. Light, strong and owns excellent heat transfer
• COMPLETE ACCESSORIES-Heat Plate (top & bottom) with 2 heating rods, 1 piece of double PID 2-layer controller, dual heaters, dual temp sensors
• SIMPLE OPERATION-Mounting the Heat plates to your press, simply tighten two set of screws onto the ram within less than 5 minutes
• WIDE FITMENT-Heat press plates for any hydraulic press up to 20 tons with 2″ diameter ram or less. Able to pair with A/H frame presses